Anti-Slip Plywood Resin Coated Board

• Highly effective anti-slip board surface
• Long lasting and durable in all weathers
• An option to supply with resin hazard line marking
• Suitable for all environments, both internal and external
• Refined, extra-hard aluminium oxide granules give superior performance and wear characteristics, industrial (grade 16, medium/coarse)

• Rapid and easy installation – suitable fasteners and adhesive/sealant available from stock
• Optional pre-drilled fixing points on each anti slip board provide easy fixing
• Standard black or a full range of RAL & BS colours are available to order
• Realistic lead times – a UK manufactured product

Non-slip plywood board:

• Birch ply, marine ply or phenolic treated

Resin coatings:

• High-quality isophthalic polyester with fire retardant option

Grit:

• Extra hard refined aluminium oxide

Hardness:

9.5 moh / 2200 knoop diamond

Load bearing capacity:

• Dependent on the thickness of your anti slip board and configuration of the supporting structure
• Please contact us for further technical advice

Applications, environments and traffic:

• Load or non-load bearing platform/decking with low slip hazard
• Interior / exterior
• Pedestrian and light wheeled

Can be fixed to:

• Concrete, steel or wooden framed structures

Fixing methods:

• Fasteners as specified + single part sealant/adhesive

Downloads

• Slip Resistance Testing PDF
• Health & Safety Executive Guidance – Assessing the slip resistance of flooring PDF
• Material Safety Data PDF

Colours:

• Black
• Grey
• A choice of any RAL / BS matched colour

Standard sizes:

• Board thickness range (mm): 12 | 15 | 18 | 24 | 30 mm
  (finished thickness is approx. 2-3 mm greater)
• Length and width (mm): 2440 x 1220 | 3050 x 1220 | 3050 x 1525. Or 3660 x 1220 (to order – minimum quantity applies)

Additional Options:

• Embedded tactile paving strip
• Hazard or highlighted edge line markings in yellow or white
• Choice of grit size: ‘Barefoot’ (grade 40, extra-fine) | ‘Pedestrian’ (grade 24, fine) | ‘Industrial’ (grade 16, medium/coarse) | ‘Offshore’ (grade 12, extra coarse)
• Recommended sealant/adhesive available from stock

Resin coated plywood boards improve safety

The base of our anti slip plywood boards is made from premium quality birch or marine ply. These are sourced exclusively from FSC and PEFC certified suppliers. Each non-slip plywood board is coated in a combination of refined aluminium oxide and resin components.

Also referred to as buffalo boards or acme panels, our coated plywood surface is highly effective and durable in all weathers. They can be relied on to withstand the rigours of industrial, infrastructure and high traffic environments.

Designed for bridge surfaces and platform structures, our anti slip boards provide a cost-effective solution to reduce slip hazards in a variety of settings. They can be easily fitted to many different types of structure, including concrete, steel and wood.

Installing your non-slip plywood boards

Coated plywood boards are installed through a system of pre-located and sealed fixing points. Boards can be further sealed in-situ using beads of single part adhesive/sealant. This prevents the ingress of moisture between neighbouring boards.  Each anti slip plywood panel is cut and finished to specified sizes prior to delivery for ease of installation.

The resin plywood range features a choice of finished thickness and overall dimensions to suit a variety of load or non-load bearing applications.

We also offer options to embed tactile paving surface strips into boards.  This further improves the safety for partially sighted persons and adds Equality Act compliance. This standard is now prerequisite in all UK built environments and provides warnings such as:

• a change in level on a bridge to a landing or stairs
• a railway platform edge

Plywood resin coated boards are a ‘made to order’ bespoke solution available with realistic lead times direct from our UK manufacturing facilities.