- Moisture tolerant – installation can take place in damp conditions
- Solvent free system
- Adheres to damp surfaces
- No primer required
- Excellent adhesion to a wide range of construction material
- Non-slump characteristics
A solvent-free, moisture tolerant, epoxy gap filling adhesive providing excellent bond strength with non-shrink & non-slump characteristics. The epoxy adhesive is ideally suited for the primer-less bonding of surface mounted polyurethane tactile tiles to a wide range of construction materials.
The adhesive comes in two parts (3.5 litres total) and should be mixed in the ratio as supplied (full packs only). Mixing should be thorough: 2-3 minutes with a slow speed power tool mixer and mixing paddle until an even consistency and colour is reached.
20 – 30 minutes @ 20°C
45 – 60 minutes @ 5°C
1 hour @ 20°C
3 hours @ 5°C
Test Age Adhesive Strength Failure Type
1 day 1.9MPa Concrete & Bond
2 days 2.3MPa Concrete
3 days 2.8MPa Concrete
Epoxy Adhesive is available in 3.5 litre packs
One tub of adhesive can be used to lay 8-10 tiles
The adhesive should be stored at room temperature. If stored in cold conditions, the containers should be allowed to warm prior to mixing. This will ease the mixing & application processes.
The adhesive should be stored away from foodstuffs and out of the reach of children.
A COSHH Material Safety Data Sheet is available for this product
The solvent free, moisture tolerant, epoxy gap filling adhesive provides excellent bond strength with non-shrink & non-slump characteristics. The adhesive adheres to damp surfaces & is ideally suited for the primer-less bonding of surface mounted polyurethane tactile tiles to a wide range of construction materials.
To apply the adhesive use a serrated adhesive trowel with an even spread over the area to receive the tiles. Firmly press the tiles into position, working from the centre out. Do not bend the tiles, while tough, they are designed for minimal flex only. Remove excess adhesive and tool for a smooth finish. Clean all tooling with a cloth before the adhesive is allowed to cure.
An application of kiln dried sand may be applied while the adhesive is still wet and left until cured.
Get in touch, call us on 01757 212744 or fill in the below contact form and we'll get back to you as soon as possible.
27th March 2020
We would like to reassure all customers and enquirers that we remain open for business, while carefully following Government guidelines issued here:
The majority of our administration staff are working remotely and we have rostered production staff to make numbers available to meet demand.
We are able to provide the full range of our standard products from stock to serve any ongoing requirements you may have and will be pleased to receive any invitations to quote for future projects.
At the present time, in accordance with social distancing regulations we will not be conducting face to face meetings with business partners until further notice. However it may be possible to arrange video link meetings if required, please contact us for further information.
Collections of orders from our workshops are possible, by prior arrangement only please and visitors are reminded to observe the standard 2m distancing rules, for the safety of all.
Our transport partners are all providing us with a normal service.
We will update this statement if required and following any further guidance issued by the UK Government.
We wish you well.